Wall panels calculator
Number of Walls
Wall 1
Height (m)
Width (m)
No of Panels
Wall 2
Height (m)
Width (m)
No of Panels
Wall 3
Height (m)
Width (m)
No of Panels
TOTAL PANELS:
0
|
How To Work Out How Many Panels You Need
1. Multiply the length by the width of the area you want to cover (to get your square metres) 2. Divide by 0.432 (this is how many panels per m2) 3. Make sure you allow enough for wastage for cuts. (we generally recommend 7%, but areas with more cuts may require more) 4. Round up to the next full panel For Example; 1. Wall size 4.2 metres wide by 2.7m high = 11.34m2 2. divided by 0.432 = 26.25 panels 3. add 7% for waste = 28.08 panels 4. round to full panel = 28 panels |
How to Install the Panels
Each panel comes in a set size of 2.4m x 180mm.
To install them, always start at the bottom, left hand corner of your wall.
Start with your first 2.4m length.
Simply screw through the exposed ply lip on the top of the panel into the studs on your wall. Continue to the end of the first row.
Cut the last board to fit and always start the next row with the offcut from the previous row.
The next board stacks on top and hides your screws.
It's very simple, but our website has some basic videos to show you how and we're happy to explain it if you'd rather give us a call.
Each panel comes in a set size of 2.4m x 180mm.
To install them, always start at the bottom, left hand corner of your wall.
Start with your first 2.4m length.
Simply screw through the exposed ply lip on the top of the panel into the studs on your wall. Continue to the end of the first row.
Cut the last board to fit and always start the next row with the offcut from the previous row.
The next board stacks on top and hides your screws.
It's very simple, but our website has some basic videos to show you how and we're happy to explain it if you'd rather give us a call.