- Feature Walls
- >
- Feature Wall - Weathered Face Sleeper
Feature Wall - Weathered Face Sleeper
SKU:
PsleepWface
A$102.00
A$102.00
Unavailable
per item
$236 per m2
Lead time within 4 weeks
Price per panel - (2400 x 180mm x approx 12mm. One panel = 0.432m2)
Calculate How Many Panels You Need
One of the most textured in our range.
...and our most sought after...
Taken from the outside face of a railway sleeper, each board shows every bit of the life of the rail - rough, exposed, weathered grain, gravel dents and both rust and oxidisation stains from the tracks, plates and spikes.
Each 180mm panel comprises a single row of 180mm wide boards. There can be up to three boards per panel.
More Information - https://www.northernriverstimber.com.au/weathered-face-sleeper-panel.html
Wall panels calculator
Number of Walls
Wall 1
Height (m)
Width (m)
No of Panels
Wall 2
Height (m)
Width (m)
No of Panels
Wall 3
Height (m)
Width (m)
No of Panels
TOTAL PANELS:
0
|
How to Install the Panels
Each panel comes in a set size of 2.4m x 180mm. To install them, always start at the bottom, left hand corner of your wall. Start with your first 2.4m length. Simply screw through the exposed ply lip on the top of the panel into the studs on your wall. Continue to the end of the first row. Cut the last board to fit and always start the next row with the offcut from the previous row. The next board stacks on top and hides your screws. It's very simple, but our website has some basic videos to show you how and we're happy to explain it if you'd rather give us a call - 1300 27 47 87 |