Feature Wall - Wire Brushed Railway Sleeper Sides
$233 per m2 ($208 on sale)
Lead time - within 3 weeks
Price per panel - (2400 x 180mm. One panel = 0.432m2)
Calculate How Many Panels You Need
Taken from the side or top of a railway sleeper, these boards have been wire brushed to make them softer and cleaner.
There are less holes than many of our other sleeper products as a portion of the boards have been milled from the side of the sleeper.
Each board displays an abundance of character, including rough, exposed, weathered grain, gravel dents and both rust and oxidisation stains from the tracks, plates and spikes.
Supplied in planks pre-attached and offset to charcoal painted backing.
Each 180mm panel comprises two 90mm wide boards.
More Information https://www.northernriverstimber.com.au/wire-brushed-railway-sides-panel.html
Wall panels calculator
Number of Walls
Wall 1
Height (m)
Width (m)
No of Panels
Wall 2
Height (m)
Width (m)
No of Panels
Wall 3
Height (m)
Width (m)
No of Panels
TOTAL PANELS:
0
|
How to Install the Panels
Each panel comes in a set size of 2.4m x 180mm. To install them, always start at the bottom, left hand corner of your wall. Start with your first 2.4m length. Simply screw through the exposed ply lip on the top of the panel into the studs on your wall. Continue to the end of the first row. Cut the last board to fit and always start the next row with the offcut from the previous row. The next board stacks on top and hides your screws. It's very simple, but our website has some basic videos to show you how and we're happy to explain it if you'd rather give us a call - 1300 27 47 87 |
Gallery
Alfresco Feature Wall - Wire Brushed Sides
Garden Feature Wall - Wire Brushed Sides
Office Fit Out - Wire Brushed Sides
|
Alfresco Seating Area - Wire Brushed Sides
Wire Brushed Railway Sides - Feature Wall
Office Fit Out - Wire Brushed Railway Sides
|
Bedroom Feature Wall - Wire Brushed Sides
Timber Cladding - Wire Brushed Railway Sides
Office Fit Out - Wire Brushed Railway Sides
|
